It seems we can’t find what you’re looking for. Perhaps searching can help.
Blade strip steel
by LUTZ BLADES
Sharp ground blade strip steel - another specialty of LUTZ BLADES
Sharp ground blade strip steel from LUTZ BLADES provides you with "endless" sharpness. If you need strip material with a sharp cutting edge to manufacture your products, we are your efficient partner. Whether material, hardness, cutting edge geometry or strip dimensions - together with you we determine all important criteria of the blade strip steel so that you receive a product that is perfectly tailored to your requirements.
How you benefit
by LUTZ BLADES Blade band steel - sharply ground:- Tape material wound on spools for further processing
- Determination of article parameters according to customer requirements
- Length of the tape section from "zero to infinity".
This is how
sharply ground blade strip steel from LUTZ BLADES:- Smallest dimensional tolerances due to CNC manufacturing in all production stages
- Multi-angle grinding, razor-sharp
- Securely packed in carton on special spools for easy further processing
Packaging systems
For blades
- Sales active thanks to transparent packaging
- Safe thanks to plastic dispenser
- User-friendly, as blades can be removed individually
Sales Active,
user-friendly and safe
Our packaging systems: sales active because all blades are visible in transparent packaging. Safe because all blades are offered in plastic dispenser. User-friendly because all blades can be removed individually.
Private label packaging
Directly from the manufacturer
This saves costsWe can offer private label packaging to all interested retail partners at economical costs. And this, of course, in a form whose safety of use is unsurpassed.
Easy to remove
Good to the environmentAnd even today, the safe and individual removal of a blade is the hallmark of LUTZ BLADES blade dispensers. Our safety dispenser systems guarantee on the one hand the protection of the blades and on the other hand that the end user is not exposed to any risk of injury when removing the blades.
All our packaging families are expandable with a self-service makeup. This is consistently realized without environmentally harmful skin films - to the benefit of consumers and our environment.
Nothing Found
The wide range of materials
for our bladesOur product portfolio offers you blades in thicknesses between 0.06 - 3.0 mm and with final hardnesses between 40 - 85 HRc. You also have a wide choice in our material program:
- Carbon steels
- Rust resistant and stainless steels
- High-performance high-speed steels (HSS)
- Tool steels
- Hard metals
- Ceramics
The versatile coating program
for our blades
TiN
Standard hard material with high wear resistance and relatively high coefficient of friction (against reference material steel approx. 0.4 to 0.7), usually gold-colored, safe application range up to approx. 300 °C.
TiC
Has lower wear resistance than TiN with significantly lower coefficient of friction (against reference material steel approx. 0.3 to 0.5), usually anthracite colored.
TiCN
Intermediate coating material between the high wear resistance of TiN and the low coefficient of friction of TiC, relative position between TiN and TiC depending on the ratio of C and N, usually anthracite color.
TiAlN
Has greater oxidation resistance than TiN with comparable coefficient of friction, usually anthracite blue.
ZrN
With a wear resistance similar to TiN, but denser structure (morphology) than TiN and thus greater resistance to pitting under appropriate load, usually steel colored.
DLC
Has high wear resistance with low coefficient of friction (approx. 0.1 against reference material steel); susceptible to impact loads and high temperatures (between 100 and 300 °C depending on structure).
CrN
Has lower wear resistance than TiN. Advantage of CrN: lower residual stresses than TiN. Therefore partially useful for applications with high bending load.
Teflon® (PTFE)
Teflon® non-stick coating (PTFE); due to the very low surface tension, practically no foreign bodies stick to the cutting edge, resistant to acids and alkalis; significantly reduced frictional resistance; the very low static friction allows jerk-free cutting (therefore very suitable for the medical sector); low wear resistance; not suitable for contact with sodium and at temperatures above 250 °C.
Color varnish
Applied over the entire surface, serves as a sorting aid for different material thicknesses and as corrosion protection.
Blueing / Blackening
Applied over the entire surface, light corrosion and starch protection, also serves as a distinguishing aid.
Customized quality
The LUTZ BLADES Rapid Prototyping
Do you need a blade that is tailored to your individual cutting process? Which, even if produced in small quantities, has a near-series quality? Our development department has the right answer to these questions: prototype production by LUTZ BLADES.
How you benefit
by LUTZ BLADES Rapid Prototyping:- Near-series initial samples
- Maximum flexibility = customized blades
- Smallest quantities possible
- Efficient and accelerated product development
- Development and optimization of the blade before series production
The Lutz BLADES Rapid Prototyping
is characterized by:- Cutting of the blade geometry by state-of-the-art machinery and CNC-based grinding of all radii
- Automatic measurement and testing of the tightest tolerances in the process
- Customized heat treatment and coating
Do you have individual wishes?
We are pleased if we can be of further assistance to you
LUTZ America Inc.
1301 Charleston Regional Pkwy
Charleston, SC 29492
USA
Tel.: +18437187077
E-mail: lindsay.osbon(at)lutz-blades.com
